Title |
Role |
Sponsor |
Period |
OSHE program, UC-NIOSH ERC |
PI |
NIOSH |
7/1/14-6/30/16 |
Development of Nanotech Minor |
PI |
NSF |
12/1/13-11/30/15 |
Squeak and Rattle Noise in Automobiles |
PI |
Hyundai Motors |
9/1/14-8/31/15 |
Analysis of Squeeze Film Damper |
PI |
GE Aviation |
9/1/13-8/30/15 |
Aeromechanics Lab, Pahse 1 - 4 |
PI |
GE Aviation |
9/1/12-12/30/15 |
OSHE Program, UC-NIOSH NIOSH ERC |
PI |
NIOSH |
7/1/08-6/30/12 |
Development of a Receptance Based Modeling Technique for Hand-Arm Vibration |
PI |
PRP/NIOSH ERC |
7/1/07-6/30/08 |
Engineering education through degree-long project experience |
PI |
NSF |
7/1/07-6/30/09 |
Development of risk assessment methof for complex noise |
PI |
NIOSH |
7/1/06-6/30/08 |
Development of NI Labview system for compressor sound and vibration testing |
PI |
Copeland Co. |
3/1/06-8/31/06 |
Development of an acoustic shock tube |
PI |
NIOSH |
3/1/06-9/31/06 |
Hot-rolled steel plate analysis |
PI |
POSTECH |
1/105-12/31/05 |
Modification of hearing protector fit test software |
PI |
NIOSH |
8/1/04-12/31/05 |
Measurement of sound power and SPL from various pieces of power tools |
PI |
NIOSH |
7/1/04-10/31/04 |
Multifractal analysis for occupational health study |
participant |
NIOSH |
7/1/02-6/30/04 |
Measurement and characterization of noise from powe tools |
PI |
NIOSH |
3/1/04-12/31/04 |
Measurement and characterization of noise from powe tools |
PI |
NIOSH |
3/1/04-12/31/04 |
Measurement and characterization of noise from powe tools |
PI |
NIOSH |
12/1/02-12/31/03 |
Assessment of sound power levels from powered hand tools used in the construction industry |
PI |
NIOSH |
5/1/01-11/20/02 |
Assessment of sound power levels from powered hand tools used in the construction industry |
PI |
NIOSH |
5/1/01-11/30/02 |
Characterization of dynamic and acoustic properties of double layered shells for optimal design of automotive mufflers |
PI |
Arvin Exhaust Technology Center |
9/1/99-8/31/01 |
Development of a design procedure to reduce brake squeal in rotor-disk systems |
PI |
Akebono Brake Systems |
1/1/96-3/31/99 |
Development of a design procedure to reduce brake squeal in rotor-disk systems |
PI |
Akebono Brake Systems |
1/1/96-3/31/99 |
Vibroacoustic analysis of suction accumulator for noise reduction of rotary compressors |
PI |
Carrier Co. |
1/1/97-12/31/97 |
Vibroacoustic analysis of suction accumulator for noise reduction of rotary compressors |
PI |
Carrier Co. |
1/1/97-12/31/97 |
Feasibility study of using acous. Array technique for ranking panale contributions |
PI |
Ford Motor Co. |
1/1/96-12/31/96 |
Efficiency improvement of a reciprocating compressor |
PI |
Samsung |
9/1/95-2/28/97 |
|
Design improvement strategies of small heremetic compressors |
PI |
Samsung |
7/1/93-9/30/94 |
|
Sound reduction of high speed air compressor |
PI |
Campbell |
3/1/93-8/31/93 |
|
Development of expert design system for compressors |
PI |
Compressor research consortium |
10/1/91-1/31/94 |