Projet 4500 (full color powder based printing)
NIST Projet Model
Pictured to the right is the NIST model printed from our very own Projet 4500. It passed all specs for the NIST model, EXCEPT for these features...
- Pin Extrusion - Pins must be >1 mm in diameter
- Hole Cut - Holes must be >1 mm in diameter
- Line Spacing - Space between extrusions must be >1 mm
PLEASE ADVISE - We would advise that all models on the Projet 4500 are to be DISPLAY PIECES ONLY. The prints that come out of this printer are fragile if parts are thin, so we advise not to print anything that will be used daily, or to be used in some sort of moving assembly.