College of Engineering and Applied Science » Research » Centers & Labs » Siemens Simulation Technology Center » Courses & Projects » NX CAM » Manufacturing Processes » Manufacturing Processes Examples » Simulating Turning Operations with NX CAM

Simulating Turning Operations with NX CAM

A cylindrical stock is to be machined into the part shown in figure. The dimensions of the stock are as follows: Diameter 180 mm and Length 625 mm.

  • Identify the correct sequence of operations / process plan needed to create the part. List any tool changes if needed. Simulate each operation in NX CAM 
Finished part with dimensions

Process Plan

Raw stock

Raw stock

Straight turning to dia 159.39

Step 1. Facing down the length to 600 mm

Straight turning to dia 141.38

Step 2. Straight turning to diameter 159.39 mm

Straight turning to dia 105

Step 3. Straight turning to diameter 141.38 mm

Taper turning

Step 4. Straight turning to diameter 105 mm

Chamfering

Step 5. Taper turning

Drilling

Step 6. Chamfering

Final Part

Step 7. Drilling